1.800.PENOFIN

Pro-Tech Wood Stripper, Cleaner, and Brightener

 

JUMP TO: Penofin® Pro-Tech Stripper | Penofin® Pro-Tech Cleaner | Penofin® Pro-Tech Brightener

 

Deck Cleaner

 

Step 1: Penofin® Pro-Tech Stripper

Step 1: Penofin® Pro-Tech Stripper

 

Specially developed to effectively remove oil finishes on all exterior wood, composite or concrete surfaces using New Clean Strip Technology. Pro-Tech Stripper leaves little or no residue, will not raise grain and provides double the coverage of average strippers. Pro-Tech Stripper is the first step in preparing your wood for a beautiful Penofin application.

 

Surface Preparation: Use Penofin Pro-Tech stripper at temperatures when wood is not hot to the touch. To remove any debris, sweep or use a power blower. Protect bordering metal and glass surfaces and tape off any areas not being stripped. Dampen surrounding vegetation with water.

 

Application: Shake product well before using. Do not thin or blend with other products. Wet the surface to be stripped. Apply a generous coat with a brush, roller or garden sprayer. Penofin Pro-Tech Stripper will soften and or dissolve most coatings in 15 - 30 minutes. Keep the wood surface wet by occasional misting. Scrub the surface with a nonmetallic bristle brush or long-handled push broom. Rinse thoroughly with water using a garden hose with a spray attachment (pressure washing is not recommended). To achieve best results for perfect preparation for Penofin wood finish, follow-up with Penofin Pro-Tech Cleaner (Step #2) followed by Penofin Pro-Tech Brightener (Step #3).

 

ALWAYS WEAR RUBBER GLOVES, EYE PROTECTION AND SOLID SHOES WHEN APPLYING. TEST ON A SMALL AREA TO ENSURE THE DESIRED RESULTS. CAUTION: SURFACE WILL BE SLIPPERY. DO NOT ALLOW PRODUCT TO DRY ON THE SURFACE.

 

Average gallon coverage: About 125-200 square feet depending on surface type.

 

Cleanup and Storage: Thoroughly rinse all equipment with water. Store any unused Penofin Pro-Tech Stripper in its original container. Do not transfer to a metal container as it will cause a chemical reaction. For disposal of unused product and empty containers, contact your local household refuse collection service.

 

MSDS

Pro-Tech Stripper Data Sheet

 

Step 2: Penofin® Cleaner

Step 2: Penofin® Pro-Tech Cleaner

 

The best outdoor cleaner for just about everything, this unique formula uses Super Hydrogen Power to tackle just about any cleaning job around your home. Mix these concentrated granules in varying strengths to effectively remove grease, grime, dirt, organic stains, tree sap and mineral deposits. Kills mold and mildew. For use on wood, masonry, concrete, fiber cement, fiberglass, outdoor furniture, cushions and floor coverings, glass and tile.

 

Surface Preparation: Sweep the surface with a stiff broom or use a blower to clean area of debris. If the surface has been treated with a coating, use Penofin Pro-Tech Stripper (Step #1) to prepare the area. Penofin Pro-Tech cleaner is most effective at temperatures where wood is not hot to the touch. Protect bordering metal surfaces when using at high concentrations. Dampen surrounding vegetation with water.

 

Penofin® Pro-Tech Cleaner Video:

View all the Penofin Wood Finish videos on Vimeo.

Application: Pour one to two cups of Penofin Pro-Tech Cleaner's hydrogenated crystals into one gallon of clean water and mix. Mist the surface with a garden hose and sprayer. Using a pump up garden sprayer, brush or mop, apply the solution liberally. For best results DO NOT ALLOW THE SOLUTION TO DRY ON THE SURFACE. Mist occasionally and agitate with a broom or nonmetallic stiff bristled brush for ten to fifteen minutes. Rinse thoroughly with water.

 

For mildew removal, driveways, garage floors, and really big messes: Wet the surface to be cleaned and sprinkle directly with Penofin Pro-Tech. Agitate the area with a broom or stiff bristle brush for at least 15 minutes. Rinse thoroughly.

 

For wood surfaces: follow the application with Penofin Pro-Tech Brightener (Step#3), to remove any tannin stains, and to return the wood to its proper Ph before staining with Penofin. For general cleaning and maintenance (barbecues, outdoor furniture, and swing sets.): Remove any loose debris. Mix 1/2 to 1 cup per gallon of water. Scrub with a stiff-bristled nonmetallic brush and rinse well. Do not let this product stand on metallic surfaces as it may pit or etch.

 

ALWAYS WEAR RUBBER GLOVES, EYE PROTECTION AND SOLID SHOES WHEN APPLYING. TEST ON A SMALL AREA TO ENSURE THE DESIRED RESULTS ARE ACHIEVED. SURFACE WILL BE SLIPPERY. DO NOT INHALE POWDER AS THIS PRODUCT WILL IRRITATE MUCUS MEMBRANES, MAKE YOUR NOSE RUN AND YOUR EYES WATER.

 

Average gallon coverage: About 300-400 square feet depending on surface type. This container will make roughly 16 gallons of cleaner.

 

Cleanup and Storage: Thoroughly rinse all equipment with water. Store any unused Penofin Pro-Tech Cleaner in a dry place in its original container. Do not transfer to a metal container as it will cause a chemical reaction. For disposal of unused product and empty containers, contact your local household refuse collection service.

 

MSDS

Pro-Tech Cleaner Data Sheet

 

Step 3: Penofin® Pro-Tech Brightener

Step 3: Penofin® Pro-Tech Brightener

 

Annihilates tough tannin stains and watermarks on all types of wood, decking, siding and fences; removes mill glaze. Penofin Pro-Tech Brightener reestablishes the Ph balance of your wood after stripping and cleaning and brightens gray weathered wood to bring back that mill-bright color.

 

Surface Preparation: Sweep the surface with a stiff broom or brush or use a power blower. Use Penofin Pro-Tech Stripper (Step #1) if needed to remove old stain and Penofin Pro-Tech Cleaner (Step #2) to prepare the area. Penofin Pro-Tech Brightener is most effective at temperatures where wood is not hot to the touch. Protect bordering metal surfaces. Dampen surrounding vegetation with water.

 

Penofin® Pro-Tech Brightener Video:

View all the Penofin Wood Finish videos on Vimeo.

Application: Pour two cups of Penofin Pro-Tech Brightener into one gallon of clean water and mix. Wet the surface with a garden hose and sprayer. Using a plastic pump up garden sprayer, apply the solution liberally. Wait 15 minutes and let it do the work for you. DO NOT ALLOW THE SOLUTION TO DRY ON THE SURFACE. Scrub and rinse thoroughly with water.

 

ALWAYS WEAR RUBBER GLOVES, EYE PROTECTION, AND SOLID SHOES WHEN APPLYING. SURFACE WILL BE SLIPPERY. DO NOT INHALE POWDER. DO NOT MIX IN A METAL CONTAINER. DO NOT STORE DILLUTED SOLUTION. DO NOT MIX WITH CHLORINE BLEACH OR OTHER CHEMICALS. HARMFUL OR FATAL IF SWALLOWED. CAN CAUSE EYE AND SKIN BURNS.

 

Average gallon coverage: Roughly 300-400 square feet depending on surface type. This container will make about 8 gallons of cleaner.

 

Cleanup and storage: Thoroughly rinse all equipment with water. Store any Penofin Pro-Tech Brightener in its original container in a dry place. Do not transfer to a metal container as it will cause a reaction. For disposal of unused product and empty containers, contact your local household refuse collection service.

 

MSDS

Pro-Tech Brightener Data Sheet

 

Pro-Tech Wood Stripper, Cleaner, and Brightener

Pro-Tech Wood Stripper, Cleaner, and Brightener

$5.00 PER GALLON OFF PENOFIN AT SEDONA PAINT THROUGH 5/10

Go Visit Michelle and the gang at Sedona Paint Center for a great special to start your outdoor season.

Read more...

GREEN UP YOUR SPRING WITH PENOFIN-VERDE

Start Fresh this Spring with Penofin Verde! Non Toxic, No Odor No Petroleum Distillates, Safe for use around Children & Animals

Read more...

TIME TO STOCK UP!

Get ready to spring clean! Penofin Pro - Tech great for all your outdoor surfaces! Wood, Concrete, Siding, Outdoor Furniture!

Read more...