Pressure-Treated Wood Finish
Penofin finish for pressure-treated wood is formulated for
all types of pressure-treated wood.
- One-coat application
- 99% ultraviolet protection
- Added mildewcides
- Prevents peeling and cracking
- Beautifies pressure-treated wood
Pressure-Treated Wood Finish Colors
Pressure-Treated Wood Finish is available in three tones:
Rainier (golden honey), Tahoe (rich cinnamon), and Yosemite
(warm dark brown).
Pressure-Treated Wood Finish Application Tips
SHAKE PRODUCT WELL BEFORE USING. DO NOT add thinning or blending
agents.
Apply Penofin to a clean, dry surface. Surface must be
free of dirt and sawdust build-up. DO NOT APPLY IN DIRECT,
HOT SUNLIGHT (when wood is hot to the touch).
Brush on, use a stain pad, or spray on (garden or pump
airless sprayers) one coat of Penofin.
For maximum penetration, wait 30 minutes, then use a nap-free
shop cloth and wipe the entire surface, removing any excess
product.
Surface will be dry to the touch in three hours and ready
for use in 12 hours.
Caution & Warnings
Combustible - keep this product away from heat, open flame,
and sparks.
Beware of spontaneous combustion. Make certain all rags
or other materials used with Penofin are soaked in water,
stored in an air-tight container, or otherwise disposed of
safely.
Gallon Coverage
200-250 square feet of Pressure-Treated Wood Finish.
Product Performance
Expect 3-5 years on vertical surfaces, 1-2 years on horizontal
surfaces depending on use and weather exposure.
|
Log-On