Penofin Marine Oil Finish
Penofin Marine Oil Finish is used for boats, docks, marinas,
or wherever wood is exposed to harsh conditions. Good for
all wood species.
- 99% ultraviolet protection
- Added high-grade mildewcide for marine conditions
- Eliminates need to varnish
- Hand-rubbed look
Marine Oil Finish Colors
Available in transparent, natural tone.
Marine Oil Finish Application Tips
SHAKE PRODUCT WELL BEFORE USING. DO NOT add thinning or blending
agents.
Apply Penofin to a clean, dry surface. Surface must be
free of dirt and sawdust build-up. DO NOT APPLY IN DIRECT,
HOT SUNLIGHT (when wood is hot to the touch).
Brush on, use a stain pad, or spray on (garden or pump
airless sprayers) one coat of Penofin.
For maximum penetration, wait 30 minutes, then use a nap-free
shop cloth and wipe the entire surface, removing any excess
product.
Surface will be dry to the touch in three hours and ready
for use in 12 hours
When using the one-coat formula, the application is now
complete.
If using the two-coat formula, wait a minimum of three hours
and apply a light second coat and again wipe any excess from
the entire application area.
Penofin's Marine Oil Finish seals and protects the mill-
bright beauty of natural wood.
Multiple coats may be wet-sanded to build a lustrous self-filling,
hand-rubbed finish giving it that hand-rubbed look mariners
prefer.
Caution & Warnings
Combustible - keep this product away from heat, open flame,
and sparks.
Beware of spontaneous combustion. Make certain all rags
or other materials used with Penofin are soaked in water,
stored in an air-tight container, or otherwise disposed of
safely.
 Gallon
Coverage
200-300 square feet
Marine Oil Finish Performance
Expect 3-5 years on vertical surfaces, 1-2 years on horizontal
surfaces depending on use and weather exposure.
|
Log-On