Quick Jump

Penofin® Exterior Products: Knotwood Composite Wood Deck Finish

Knotwood Composite Wood Deck Finish1 Gallon can

Knotwood Composite Wood Deck Finish

KNOTWOOD is for wood composite decking materials, such as Trex®, Timbertek®, and Smartdeck®. Although composite decking has been touted as maintenance free, studies have shown it is still subject to ultraviolet damage and mildew. Penofin addresses these issues and protects composite decking. Composite decking is also prone to staining, which when coated with Knotwood, is protected against permanent stains. And Penofin makes composite decking more attractive!

  • One-coat application
  • 99% ultraviolet protection
  • Added mildewcides
  • Stain resistant
  • Color enhancer

Knotwood Composite Wood Deck Finish Colors
Available in three transparent tones: Knot Cedar, Knot Redwood, and Knot Mahogany.

Composite Wood Deck Finish Application Tips
  • SHAKE CAN WELL BEFORE USING. DO NOT add thinning or blending agents.
  • Apply Penofin to a clean, dry surface. Surface must be free of dirt and sawdust build-up. DO NOT APPLY IN DIRECT, HOT SUNLIGHT (when surface is hot to the touch).
  • Brush on, use a stain pad, or spray on (garden or pump airless sprayers) one coat of Penofin. A dip-tank or prestain machine will also provide excellent results with maximum durability. DO NOT FLOOD.
  • Allow for maximum penetration, wait 30 minutes, then use a nap-free shop cloth and wipe the entire surface, removing any excess product.
  • Surface will be dry to the touch in three hours and ready for use in 12 hours
  • Gallon Coverage
    200-250 square feet of Composite Wood Deck Finish.

    Product Performance
    Expect 1-2 years on horizontal surfaces depending on use and weather exposure.

    Copyright Performance Coatings Inc. (PCI) - Penofin® 2008